# xorg.conf (Xorg X Window System server configuration file) # # This file was generated by dexconf, the Debian X Configuration tool, using # values from the debconf database. # # Edit this file with caution, and see the xorg.conf manual page. # (Type "man xorg.conf" at the shell prompt.) # # This file is automatically updated on xserver-xorg package upgrades *only* # if it has not been modified since the last upgrade of the xserver-xorg # package. # # If you have edited this file but would like it to be automatically updated # again, run the following commands as root: # # cp /etc/X11/xorg.conf /etc/X11/xorg.conf.custom # md5sum /etc/X11/xorg.conf >/var/lib/xfree86/xorg.conf.md5sum # dpkg-reconfigure xserver-xorg Section "Files" # if the local font server has problems, we can fall back on these FontPath "/usr/share/fonts/X11/misc" FontPath "/usr/lib/X11/fonts/misc" FontPath "/usr/lib/X11/fonts/cyrillic" FontPath "/usr/lib/X11/fonts/100dpi/:unscaled" FontPath "/usr/lib/X11/fonts/75dpi/:unscaled" FontPath "/usr/lib/X11/fonts/Type1" FontPath "/usr/share/fonts/type1" FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID" FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" FontPath "/usr/share/fonts/truetype" FontPath "/usr/lib/X11/fonts/truetype" FontPath "/usr/share/fonts/X11/CID" FontPath "/usr/lib/X11/fonts/CID" # FontPath "/usr/share/fonts/X11/100dpi" FontPath "/usr/lib/X11/fonts/100dpi" # FontPath "/usr/share/fonts/X11/75dpi" FontPath "/usr/lib/X11/fonts/75dpi" EndSection Section "ServerFlags" Option "BlankTime" "10" Option "StandbyTime" "20" Option "SuspendTime" "30" Option "OffTime" "60" # Option "Xinerama" "On" EndSection Section "Module" Load "bitmap" Load "dbe" Load "ddc" Load "evdev" Load "extmod" Load "freetype" Load "glx" Load "int10" Load "record" Load "type1" Load "vbe" EndSection Section "InputDevice" Identifier "Generic Keyboard" Driver "keyboard" Option "CoreKeyboard" Option "XkbRules" "xorg" Option "XkbModel" "pc105" Option "XkbLayout" "us" EndSection Section "InputDevice" Identifier "Synaptics Touchpad" Driver "synaptics" Option "CorePointer" Option "Device" "/dev/input/mouse1" Option "Protocol" "auto-dev" Option "HorizScrollDelta" "0" # man synaptics(5) # See /usr/share/doc/xserver-xorg-input-synaptics/* Option "EmulateMidButtonTime" "50" Option "LeftEdge" "120" Option "RightEdge" "830" Option "TopEdge" "120" Option "BottomEdge" "650" # Option "LeftEdge" "1700" # Option "RightEdge" "5300" # Option "TopEdge" "1700" # Option "BottomEdge" "4200" Option "FingerLow" "25" Option "FingerHigh" "30" Option "MaxTapTime" "0" Option "MaxTapMove" "0" Option "UpDownScrolling" "on" Option "VertScrollDelta" "30" Option "LeftRightScrolling" "off" Option "HorizScrollDelta" "20" Option "LockedDrags" "off" Option "EdgeMotionUseAlways" "false" Option "MinSpeed" "0.5" Option "MaxSpeed" "1.2" Option "AccelFactor" "0.5" Option "EdgeMotionMinSpeed" "200" Option "EdgeMotionMaxSpeed" "200" Option "SHMConfig" "on" EndSection # USB or Bluetooth mouse Section "InputDevice" Identifier "USB mouse" Driver "mouse" Option "Device" "/dev/input/mouse2" Option "Protocol" "ImPS/2" Option "SendCoreEvents" "true" # Option "Emulate3Buttons" "true" Option "ZAxisMapping" "4 5" # Option "Resolution" "100" EndSection Section "Device" Identifier "NVS-120M" VendorName "NVIDIA Corporation" BoardName "512MB Quadro NVS-120M TurboCache" Driver "nvidia" BusID "PCI:1:0:0" # See /usr/share/doc/NVIDIA_GLX-1.0/README.txt Option "NoLogo" "true" # TwinView ---------------------------------------- Option "TwinView" # CRT=beamer with a Xnest fullscreen presentation. # 1) No offset. The Xnest window should be set hiding its "topar" # or without decorations. Good positioning and maximisation. #Option "MetaModes" "DFP-0: 1920x1200, CRT-0: 1024x768@1920x1200" # 2) The offset is to hide the xnest topbar. As a bonus, # windows will not maximise over the fluxbox toolbar. A # drawback is bad positioning of windows. #Option "MetaModes" "DFP-0: 1920x1200, CRT-0: 1024x768@1920x1180 +0+20" # 3) Allows to quit the CRT area without scrolling (good to start # hidden things during a presentation). Maximisation however is # done w.r.t. the small area... #Option "MetaModes" "DFP-0: 1920x1200, CRT-0: 1024x768 +0+20" #Option "TwinViewOrientation" "Clone" # 4) CRT screen separate from laptop screen. Option "MetaModes" "DFP-0: 1920x1200, CRT-0: 1280x1024" Option "TwinViewOrientation" "DFP-0 RightOf CRT-0" #Option "RandRRotation" "true" #Option "Rotate" "left" # Not recommended but allow to plug in a monitor without restarting Option "ConnectedMonitor" "DFP, CRT" # If EDID cannot be retrieved: Option "HorizSync" "DFP-0: 30-75; CRT-0: 30-70" Option "VertRefresh" "DFP-0: 30-60; CRT-0: 48-120" EndSection Section "Device" Identifier "NVS-120M(1)" Driver "nvidia" Screen 1 EndSection Section "Monitor" Identifier "WUXGA Flat pannel" Option "DPMS" HorizSync 30-75 VertRefresh 30-60 Modeline "1280x800@60" 83.91 1280 1312 1624 1656 800 816 824 841 # V-freq: 60.00 Hz // h-freq: 47.80 KHz Modeline "1024x768" 60.80 1024 1056 1128 1272 768 768 770 796 EndSection Section "Monitor" Identifier "CRT" HorizSync 30-70 VertRefresh 48-120 Option "DPMS" Mode "1024x768" # vfreq 84.997Hz, hfreq 116.955kHz DotClock 94.500000 HTimings 1024 1072 1168 1376 VTimings 768 769 772 808 Flags "+HSync" "+VSync" EndMode EndSection Section "Screen" Identifier "Default Screen" Device "NVS-120M" Monitor "WUXGA Flat pannel" DefaultDepth 24 SubSection "Display" Depth 1 Modes "1920x1200" "1680x1050" "1280x800" "1024x768" "800x600" EndSubSection SubSection "Display" Depth 4 Modes "1920x1200" "1680x1050" "1280x800" "1024x768" "800x600" EndSubSection SubSection "Display" Depth 8 Modes "1920x1200" "1680x1050" "1280x800" "1024x768" "800x600" EndSubSection SubSection "Display" Depth 15 Modes "1920x1200" "1680x1050" "1280x800" "1024x768" "800x600" EndSubSection SubSection "Display" Depth 16 Modes "1920x1200" "1680x1050" "1280x800" "1024x768" "800x600" EndSubSection SubSection "Display" Depth 24 Modes "1920x1200" "1680x1050" "1280x800" "1024x768" "800x600" EndSubSection EndSection Section "Screen" Identifier "Screen 1" Device "NVS-120M(1)" Monitor "CRT" DefaultDepth 24 SubSection "Display" Depth 24 Modes "1280x1024" "1024x768" "800x600" "640x480" EndSubSection EndSection Section "ServerLayout" Identifier "Default Layout" Screen "Default Screen" # Screen "Screen 1" RightOf "Default Screen" InputDevice "Generic Keyboard" InputDevice "Synaptics Touchpad" InputDevice "USB mouse" EndSection Section "DRI" Mode 0666 EndSection